Vertical vessel with temperature control
TFPX 2500 D1220 H2360 4404
Material: 140005
PED 2014/68/EU EN13445
PED 2014/68/EU Category III
PED 2014/68/EU Madule H
Nominal volume in L: 2500
Geometrical volume [l]: 3200
Internal diameter in mm: 1220
External diameter [mm]: 1420
Jacket height H in mm: 2360
Installation orientation: vertical
Type: Vertical tank - bottom BM - jacket E - lid BM
Support type: Bracket
Medium/Product: Fluid group 2
Min. design pressure in barg: -1
Max. design pressure in barg: +3,10
Test pressure [barg]: +5,1
Max. design temperature (°C): 177
min. design temperature (°C) -29
max. working temperature (°C) 135
min. working temperature (°C) 18
Material: EN 1.4404,stainless steel
P2 second space: half-pipe jacket
P2 position: bottom
P2 position: jacket
P2 Medium: FLUID GROUP 2
P2 Max. design pressure barg: +10,3
P2 min design pressure [barg]: -1
P2 Max. design temp. (°C): 135
P2 min. design temp.(°C) 18
P2 Test pressure [barg]: +17,44
P2 Material: EN 1.4307/ASTM304L
Min. operating p. DJ [barg]: 0
Max. operating p. DJ [barg]: +4,5
P3 third space: insulation
P3 position: bottom
P3 position: jacket
P3 Material: EN 1.4301/ASTM304
P3* MINERALWOOL_CHLORIDE FREE_50
External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality.
Internal product contact surface is RA038
Weld on the external (visible) side is striped (BP), partially visible weld structure.
Internal product contact weld B320_RA04 100%
Drawings and calculations: As built drawing
Drawings and calculations: FAT report (Factory Acceptance Test)
Drawings and calculations: Identification plate
Drawings and calculations: Pressure calculation report
Drawings and calculations: Construction drawing
Drawings and calculations: Drawing (weld log)
Doc. of fabrication: Additional welding documentation of the supplier (welding equipment)
Doc. of fabrication: List of auxiliary materials (wire, gas)
Doc. of fabrication: Signature list
Doc. of fabrication: Welding log + welder certificates
Doc. of fabrication: Welding procedure qualification record (WPQR)
Doc. of fabrication: Welding procedure specification (WPS)
DECLARATION OF CONFORMITY, MANUALS Manufacturer Certificates
DECLARATION OF CONFORMITY, MANUALS Declaration of Conformity PED
DECLARATION OF CONFORMITY, MANUALS Instruction manual
Nondestructive Testing: Surface roughness test report - inside
Nondestructive Testing: Surface roughness test report - outside
Nondestructive Testing: Penetrant testing report (PT)
Nondestructive Testing: Riboflavin test report
Nondestructive Testing: RT_POR
Nondestructive Testing: Pressure test report
Nondestructive Testing: Report of visual control (VT)
Surface treatement: Electropolishing report
Surface treatement: Pickling and passivation report
Surface treatement: Cleaning report
List of materials and cert.: Material certificate
List of materials and cert.: List of materials (entire vessel)
List of spare parts: List of spare parts